Chevette/Kadett brake upgrade (PRICE INCREASE JANUARY)

[V8chevette]

Well chaps i am pleased to say i can offer a brake upgrade once again

In the original kit i was using discs from a Astra GSI which needed a aluminium spacer making to correct the offset, this made the kits quite expensive.

I have now started using discs from a Audi 80 which are the correct offset and don't need the spacer but still need the center bore increasing and redrilling to match the Chevette/Kadett hub.

The calipers used with the discs are still from MK3 Astra GSI and not provided.

This is the old setup with the Astra discs the Audi ones look the same but without the spacer



I can supply a choice of modified discs,

Brembo (or equivalent) £120 + P&P

Quinton Hazell (or equivalent) £95 + P&P

Prices could change depending on price at time of order. but not by much

[iano]

do you know if a 6x13 ATS rim (A series Manta will fit over the set up

[V8chevette]

do you know if a 6x13 ATS rim (A series Manta will fit over the set up

Errrm i'm not 100% sure but a standard 13" HS alloy did fit

[chevette2000]

i have this setup and the hs wheels fit no problem

they are excellent brakes

[The Flying Doctor]

do you know if a 6x13 ATS rim (A series Manta will fit over the set up

Errrm i'm not 100% sure but a standard 13" HS alloy did fit

I had volvo 4 pots insde HS alloy wheels with clearance ( not much)

[iano]

thanks guys,  what are the calipers like to fit

[V8chevette]

thanks guys,  what are the calipers like to fit

The calipers bolt straight on with no modification but you do have limit the steering slightly to stop them hitting the lower arms on full lock. I'll post a pic of how i did it when i get chance to take one

[dpm]

Hello

Im interested in a pair of these discs for my Kadett. Did you get a chance to get a picture of how to limit the steering yet?

Also do you accept paypal?

And finally if using a pair of gsi calipers will the brake pipes connect straight up ie are they the same thread pattern as origional i would imagine metric?

[V8chevette]

Hello

Im interested in a pair of these discs for my Kadett. Did you get a chance to get a picture of how to limit the steering yet?

Also do you accept paypal?

And finally if using a pair of gsi calipers will the brake pipes connect straight up ie are they the same thread pattern as origional i would imagine metric?

Hi I shall get a pic of the steering stop this evening.

I'm not sure about the original brake pipes as i never tried them, i made up some braided hoses.

Cheers Jonathan

[dpm]

Thanks for the reply, could you please check on postage costs to Co Cork in Ireland

The Quinton Hazell (or equivalent) £80 + P&P are the discs i would be interested in.

[V8chevette]

As promised a picture of how i limited the steering.

I drilled and tapped the steering stop at the bottom of each hub and screwed in a 8mm cap head bolt and tightened it up against the stop, simples





Two bolt will be provided with each kit

[V8chevette]

Thanks for the reply, could you please check on postage costs to Co Cork in Ireland

The Quinton Hazell (or equivalent) £80 + P&P are the discs i would be interested in.

PM sent 

[richard i]

alright mate very interested in the brake upgrade, wot choices have you got for upgraded discs mate?
and prices for shipping to luton

cheers mate

[V8chevette]

alright mate very interested in the brake upgrade, wot choices have you got for upgraded discs mate?
and prices for shipping to luton

cheers mate

The only choice for discs are the two above, P@P would be £10

[richard i]

would be the brembo ones for me then 
do you take pay pal .
wot is delivery time like?