Author Topic: replacing sero and master cyc  (Read 2125 times)

0 Members and 1 Guest are viewing this topic.

Offline chevette 2.4

  • Forum Expert
  • Posts: 332
  • keep her sideways and between the ditches
replacing sero and master cyc
« on: Jun 19, 2009, 01:45:49 »
hey guys site lookin fab by the way

my mc has gave out and i am also about to start engine transplant and shall be running carbs so the srvo shall be in the way

what do u guys recon of a bias box????


cheers liam

Offline Mad Max A.K.A. Mal

  • Committee Member
  • Just Call Me Blydenstein
  • ****
  • Posts: 11801
Re: replacing sero and master cyc
« Reply #1 on: Jun 19, 2009, 22:22:08 »
I can't really comment on the bias box as its years since I drove anything fitted with one and that was an Escort (which had a tendancy regardless of setting to lock up the rear wheels under load) but on most cars I've had either for racing or trackdays the servo has been removed to provide better feel from the pedal as sometimes the feeedback is poor and a bit mechanical with the servo.

Cheers Mal
It's better to burn out than to fade away . . .

Offline chevette 2.4

  • Forum Expert
  • Posts: 332
  • keep her sideways and between the ditches
Re: replacing sero and master cyc
« Reply #2 on: Jun 20, 2009, 01:53:12 »
cheers for the input mal

how would ur mot feel about no servo

if it ain't there it can't work right

did u see the picture of ur grp 4 chevette on totalopel.com

it looks sweet as the guy that bought it had a huge grin on his face pullin in to the show

Liam


Offline Mad Max A.K.A. Mal

  • Committee Member
  • Just Call Me Blydenstein
  • ****
  • Posts: 11801
Re: replacing sero and master cyc
« Reply #3 on: Jun 20, 2009, 10:33:37 »
I didn't see the photos on there (didn't even know that forum existed) but Joe did send me some photos over as below

Interesting forum . . now I know where the blue Chevanne went that was for sale on ebay early last year!

It's better to burn out than to fade away . . .

Offline Mad Max A.K.A. Mal

  • Committee Member
  • Just Call Me Blydenstein
  • ****
  • Posts: 11801
Re: replacing sero and master cyc
« Reply #4 on: Jun 20, 2009, 10:35:43 »
Re MOT - provided the efficiency is ok the servo doesn't matter.
It's better to burn out than to fade away . . .

Offline chevette 2.4

  • Forum Expert
  • Posts: 332
  • keep her sideways and between the ditches
Re: replacing sero and master cyc
« Reply #5 on: Jul 01, 2009, 00:07:08 »
ok

been lookin at options

1 remote servo ebay (what options have i here as in what mc with what servo)
2 pedal box inside da car  http://www.alloywheelrepairs.com/chevparts.htm

what other options r there

liam