Author Topic: noisy wipers  (Read 367 times)

0 Members and 1 Guest are viewing this topic.

Offline parko

  • COG Member
  • Forum Superstar
  • ****
  • Posts: 1198
noisy wipers
« on: Jul 23, 2017, 20:57:34 »
shedvette has been standing neglected for nearly 2 years and im slowley getting closer to mot day having got my wipers working on all speeds (poor contacts) but they are noisy as hell i have stripped half the dash/airvents away to grease all the moving parts on the linkage it still really noisy even lifting the wiper arms off the screen to reduce the drag its still the same any ideas anyone?

Join the Chevette Owners Group. It's only 20 for twelve months. Benefit from discounts, parts, advice, shows, newsletters and much more!

Offline John PH

  • COG Member
  • Advanced Forum User
  • ****
  • Posts: 176
Re: noisy wipers
« Reply #1 on: Jul 24, 2017, 12:31:19 »
Is that the "OIY OIY" sound that they make? My one's don't do that sound, can't say I wasn't dissapointed.

Offline mick

  • Club Chairman
  • Forum Superstar
  • ****
  • Posts: 1686
Re: noisy wipers
« Reply #2 on: Jul 24, 2017, 20:53:56 »
Without hearing it bit difficult but maybe dry bearings in the motor ? Have you lubricated the spindle's  ?  Maybe worth dropping the linkage of the motor and see if the linkage moves freely and or is the motor still noisy with it disconnected.

Offline scotty

  • COG Member
  • Forum Superstar
  • ****
  • Posts: 1681
Re: noisy wipers
« Reply #3 on: Jul 25, 2017, 15:12:26 »
Most likely the spindles corroded and starting to seize up. Hard to lubricate but some squirty release or penetrating oil on the spindles might help to free them up. Once free lubricate properly with normal oil. - Scotty 

Offline parko

  • COG Member
  • Forum Superstar
  • ****
  • Posts: 1198
Re: noisy wipers
« Reply #4 on: Jul 26, 2017, 21:46:17 »
thanks for the info ill lube the spindles at the weekend if no better ill take the motor off

Offline Bill

  • Administrator
  • Forum God
  • ******
  • Posts: 3120
  • Likes all chevs grubby and sometimes yellow
Re: noisy wipers
« Reply #5 on: Jul 31, 2017, 00:31:55 »
the motor bearings maybe your issue.

apparently they are the same bearings used in skateboard wheels.

bill

Offline Rich Britton

  • COG Member
  • Forum Expert
  • ****
  • Posts: 354
Re: noisy wipers
« Reply #6 on: Aug 04, 2017, 14:35:14 »

  (And fidget spinners then!!!)

Offline chevettespecial80

  • COG Member
  • Forum Newbie
  • ****
  • Posts: 23
Re: noisy wipers
« Reply #7 on: Aug 05, 2017, 21:11:00 »
The noise is almost certainly the motor, I have had to change mine 4 times in twenty years!

Offline parko

  • COG Member
  • Forum Superstar
  • ****
  • Posts: 1198
Re: noisy wipers
« Reply #8 on: Aug 09, 2017, 22:24:35 »
does the motor attach to the linkage with just the one bolt?

Offline Bill

  • Administrator
  • Forum God
  • ******
  • Posts: 3120
  • Likes all chevs grubby and sometimes yellow
Re: noisy wipers
« Reply #9 on: Aug 11, 2017, 11:04:49 »
not had one off for ages but yep just the 1 as i remember.

Offline chevettespecial80

  • COG Member
  • Forum Newbie
  • ****
  • Posts: 23
Re: noisy wipers
« Reply #10 on: Aug 19, 2017, 22:55:10 »
Yes just the one 13mm nut, when you re fit it make sure it's in the parked position and your wiper arms are in the correct parked position on the windscreen.

Join the Chevette Owners Group. It's only 20 for twelve months. Benefit from discounts, parts, advice, shows, newsletters and much more!
 

COG shoutbox

Refresh History
  • Bill: fixed gopefully
    Aug 11, 2017, 11:09:37
  • John PH: What's happened to my menership
    Aug 21, 2017, 12:26:37
  • John PH: I'm not a member again. What's happened?
    Aug 21, 2017, 12:26:53
  • Mad Max A.K.A. Mal: @bill can you check johns membership status?
    Aug 21, 2017, 18:09:31
  • Bill: will check
    Aug 22, 2017, 18:36:25
  • Bill: IT says John PH member here
    Aug 22, 2017, 18:42:55
  • Bill: not sure what happened?
    Aug 22, 2017, 18:44:25
  • John PH: Yeah I paid for another membership again
    Aug 23, 2017, 12:26:54
  • Trudgechr: How do i add to the register
    Sep 02, 2017, 16:20:58
  • Bill: you can put it in here > [link]  , then a mod will move it to the right category eventually :)
    Sep 17, 2017, 10:34:41
  • Tomo195: Hi all.
    Oct 09, 2017, 20:31:33
  • Tomo195: does anybody know how I can post pics without using photobucket
    Oct 09, 2017, 20:39:11
  • Bill: just use the insert image button if the files are local to you
    Oct 12, 2017, 00:03:40
  • Bill: oops i meant the attachments and other options red bit at the bottom of a new post.
    Oct 12, 2017, 00:04:36
  • Barry Arthur: Needing help we v5 for my chevette
    Nov 14, 2017, 20:47:50
  • parko: what fo you need barry
    Nov 15, 2017, 21:38:28
  • parko: do
    Nov 15, 2017, 21:38:35
  • Barry Arthur: I don't have a up to date v5.according to DVLA I need a pic of vin plate and vin number stamped in to shell of vehicle.i can't find stamped on number.does anyone know where it is
    Nov 15, 2017, 22:26:54
  • parko: i cpuld be wrong but is it under the carpet between the drivers seat and sill
    Nov 16, 2017, 19:29:21
  • hsrwannabe: On the dashboard where the tax disc  used to go if its a pre 79 car
    Nov 17, 2017, 00:03:59